Printing & Framing

Every print produced by Remy Gerega is made to museum archival standards, from paper and ink through to the timber frame and UV-blocking plexiglas. Each piece is printed, mounted and framed exclusively for you.

Frame Sizing

Size Guide

All prints are available in four sizes. The diagram below shows each frame to scale. Sizes can be oriented portrait or landscape — the first dimension listed is the longest edge.

SMALL 330 × 245mm MEDIUM 630 × 455mm LARGE 938 × 673mm GIANT 1238 × 873mm Frame / paper Image area
Size Image area Paper size Finished frame Moulding
Small 250 × 165mm 300 × 215mm 330 × 245mm 15mm face / 30mm depth
Medium 520 × 345mm 600 × 425mm 630 × 455mm 15mm face / 30mm depth
Large 800 × 535mm 900 × 635mm 938 × 673mm 19mm face / 38mm depth
Giant 1100 × 735mm 1200 × 835mm 1238 × 873mm 19mm face / 38mm depth
Paper & Ink

The Print

We print to a 310gsm 100% Cotton Rag stock using genuine Epson Ultrachrome Pro inks — the same archival-grade combination used by the world's leading fine art print studios. Your giclée print is then dry mounted to an acid-free 5mm foamboard using an archival adhesive film, ensuring the work remains perfectly flat for life.

Paper

310gsm 100% Cotton Rag

Ink

Genuine Epson Ultrachrome Pro

Process

Archival Giclée

Mount

5mm Acid-free Foamboard, archival adhesive film

Timber & Glass

The Frame

Our frames are made from locally sourced, sustainable Victorian Ash. The timber is milled, hand sanded and painted to a consistent finish. All sizes except Small use a shadowbox construction — the work sits set back from the museum-grade UV plexiglas, creating a subtle depth that gives each piece a very modern gallery presence.

Sustainable Victorian Ash moulding
3mm Museum UV Plexiglas
Shadowbox air gap
Archival Giclée print
5mm Acid-free Foamboard
CROSS SECTION — SHADOWBOX FRAME 3mm UV Plexiglas Air gap (shadowbox) Giclée print 5mm foamboard Victorian Ash Moulding 15mm face (Small/Medium) · 19mm face (Large/Giant) ← front face
Please note

The Small size uses a standard flush mount rather than shadowbox construction. All other sizes feature the full shadowbox profile shown above.

Delivery

Shipping & Returns

Each print takes approximately 10–14 business days to print, mount, frame and ship. Once dispatched you will receive a tracking number so you can follow its progress. Most orders arrive within 3–5 business days of dispatch.

Framed prints ship within Australia only. Unframed rolled prints ship internationally — select your destination at checkout.

Due to the personalised nature of every piece — meticulously printed, mounted and framed exclusively for you — we are unable to accommodate change-of-mind returns.

If your order arrives damaged, please contact us within 48 hours of delivery with photographs and we will arrange a replacement at no cost to you.